IPSA-05NA1D02N_克特

IPSA-05NA1D02N克特方形接近开关特点：

　　1：方形外壳结构，贴面安装，

　　2：电源极性保护(直流)有输出短路保护。

　　3：突波吸收回路(交流)，有效防止突波损坏

　　4：结构坚固，IP67防护等级适用各种环境。

IPSA-05NA1D02N克特方形电感式接近开关是由三大部分组成：振荡器，开关电路及放大输出电路。振荡器产生一个变交磁场，并达到感应距离时，在金属目标内产生涡流，涡流形成反方向磁场，从而导致震荡衰减，已至停振。振荡器震荡及停振。振荡器震荡及停振的变化被后级放大电路处理并转换成开关信号，触发驱动控制器件，从而达到非接触式之检测目的。由该工作原理我们得出：所有的磁性金属，不论是静止状态还是运动状态，都将被准确检测到。

其特点为：

1.非接触式位置检测，无机械磨损，高可靠性

2.清晰可见的指示灯设计，轻松判断开关的工作状态

3.电缆连接与连接器连接可选

4.采用专门IC制作，性能更加稳定

5.能进行各种限位，计数控制，适用范围广。

The IPSA-05NA1D02N KTGEE square inductive proximity switch consists of three main parts: oscillator, switch circuit, and amplifier output circuit. When the oscillator generates a variable alternating magnetic field and reaches the induction distance, eddy currents are generated within the metal target, forming a reverse magnetic field, which leads to oscillation attenuation and has reached a stop. Oscillator oscillation and stop. The oscillation and stop changes of the oscillator are processed by the subsequent amplification circuit and converted into switch signals, triggering the driving control device to achieve non-contact detection. From this working principle, we can conclude that all magnetic metals, whether in a stationary or moving state, will be accurately detected.